Welcome to Insaco® Thank you for visiting!
For over 60 years we have been a precision machining and polishing fabricator of parts from all technical ceramics, sapphire, glass and quartz. We machine these materials to very precise tolerances (many times measured in millionths of an inch) for dimension, flatness, wedge and roundness or cylindricity. Our customers typically have a critical application that requires extremely tight tolerances in ultra-hard materials. We also have the capability to grind and polish spherical radius parts in a variety of hard materials, both inside and outside diameters, to optical requirements.
Please feel free to navigate to other pages within our site to see more information on all of our high precision machining services, materials and capabilities. If you would like more information please click here to send a request, or visit our Frequently Asked Questions page.
|Modulus of Elasticity||13 x 106 psi|
|Dielectric Constant||7.4 (@ 1 MHz)|
|Volume Resistivity||2 x 1013 ohm-cm|
|Coefficient of Thermal Expansion||0.00 +/- 0.1 x 10-6/°C|
|Thermal Conductivity||1.43 W/mK|
|Specific Heat||0.80 cal/g °C|
|Maximum Working Temperature||600 °C|
|Index of Refraction||1.54|
|Transmission Band||0.3 - 2.5 Wavelength (microns)|
|All properties are at room temperature unless otherwise noted.|
Engineering data are representative, and are not intended as absolute nor warrantable. Manufacturer’s Data shown is blended from multiple sources and therefore illustrates the marketplace.
Zerodur® is a glass ceramic with an extremely low thermal expansion coefficient.Other Glass Ceramics :
Wikipedia Reference for Zerodur
If we can help you in any way please call us and we would be happy to be of service.
Phone: (215) 536-3500
Fax: (215) 536-7750